Communications Protocols & Specifications: ITU G.991.2 (G.shdsl) Type: DSL modem / wireless cellular modem Dimensions & Weight Depth: 24.9 cm Height: 4.4 cm Width: 32.5 cm Environmental Parameters Humidity Range Operating: 10 - 85% (non-condensing) Max Operating Temperature: 40 C Min Operating Temperature: 0 C Expansion / Connectivity Interfaces: LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45 General Authentication Method: RADIUS, TACACS+ Capacity: IPSec VPN tunnels: 20 Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386 Connectivity Technology: Wired Data Link Protocol: Ethernet, Fast Ethernet Device Type: Router - 4-port switch (integrated) Enclosure Type: Desktop Encryption Algorithm: LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES Features: NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD) Flash Memory: 128 MB Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS RAM: 256 MB (installed) / 768 MB (max) Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE Status Indicators: Port status, power Power Power Device: External power adapter - 60 Watt Voltage Required: AC 120/230 V (50/60 Hz)

CISCO888G-K9

  • CISCO888G-K9