Communications Protocols & Specifications: ITU G.991.2 (G.shdsl) Type: DSL modem Dimensions & Weight Depth: 24.9 cm Height: 4.4 cm Width: 32.5 cm Environmental Parameters Humidity Range Operating: 10 - 85% Max Operating Temperature: 40 C Min Operating Temperature: 0 C Expansion / Connectivity Expansion Slots: 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin Interfaces: LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45 General Authentication Method: RADIUS, TACACS+ Capacity: IPSec VPN tunnels: 20 Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 Connectivity Technology: Wired Data Link Protocol: Ethernet, Fast Ethernet Device Type: Router - 4-port switch (integrated) Enclosure Type: Desktop Encryption Algorithm: DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES Features: NAT support, interrupt status port (ISP), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, MAC address filtering, IPv6 support, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy Flash Memory: 128 MB Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA RAM: 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE Status Indicators: Port status, power Power Power Device: External power adapter - 60 Watt Voltage Required: AC 120/230 V (50/60 Hz) Software / System Requirements OS Provided: Cisco IOS Advanced IP services

CISCO888-SEC-K9

  • CISCO888-SEC-K9