Communications Digital Signaling Protocol: ADSL2, ADSL2+, VDSL2 Protocols & Specifications: ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A Type: DSL modem Dimensions & Weight Depth: 24.9 cm Height: 4.4 cm Weight: 2.5 kg Width: 32.5 cm Environmental Parameters Humidity Range Operating: 10 - 85% Max Operating Temperature: 40 C Min Operating Temperature: 0 C Expansion / Connectivity Expansion Slots: 1 (total) / 1 (free) x SO-DIMM 200-pin Interfaces: LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2 General Authentication Method: RADIUS, TACACS+ Capacity: IPSec VPN tunnels: 20 Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 Connectivity Technology: Wired Data Link Protocol: Ethernet, Fast Ethernet Device Type: Router - 4-port switch (integrated) Enclosure Type: Desktop Encryption Algorithm: DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES Features: Firewall protection, auto-sensing per device, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy Flash Memory: 128 MB Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS RAM: 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE Status Indicators: Port status, power Power Power Device: External power adapter - 60 Watt Voltage Required: AC 120/230 V (50/60 Hz) Software / System Requirements OS Provided: Cisco IOS Advanced IP services


  • CISCO887VA-K9